Sirina 22DO M

Sirina 22DO M is an actuator composed of 22 potential-free relay outputs (dry contact). Besides, manual control is added in order to test the outputs and LED indicators of the status and selection of them. For this, capacitive push-buttons are on the cover of the device, as well as LED indicators for selection and on/off of the outputs. Two arrows allow to move between the different leds referred to the corresponding output. Leds blink while signaling the output.; but when on is pressed, the led stops blinking for a second and start blinking again. On/off buttons open/close the outputs relay. Each output could work independently or simultaneously in different modes: binary outputs, blinds, fan-coils or thermo valves. It also has up to 8 arithmetic and logic units (UAL), as well as up to 8 timers/counters that allow programming complex logic operations, timings, counters, etc. Using internal or external variables.

Categories: ,

Description

Sirina 22DO M KNX actuator with 22 digital outputs. On/Off actuator with 22 outputs, free voltage relays with a cutting power of 16A@230V each one. Multi function programming. Outputs work simultaneously or independently in different modes (binary outputs, blinds, fan-coil, etc). Arithmetic-Logic Unit (ALU).

Manual control system for relay outputs.
Supply: 29V DC from KNX BUS.
Consumption: 9mA from KNX BUS.
Switching capacity: 16A @ 230V AC per output.
DIN rail mounted (12 modules).
4 capacitive push-buttons for manual control of the outputs.
Last position memory in case of power failure.
KNX connecting terminal bus Screw terminal block for inputs and outputs.